FixVault
Home › Infiniti › 2004 › G35 Base, 2D Coupe, Automatic › Repair and Diagnosis › Engine Performance › System › 2004 - Engine Control System - Coupe › DTC P1148, P1168: Closed Loop Control › Overall Function Check › With GST

With GST

  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM terminal 35 [HO2S1 (B1) signal] or 16 [HO2S1 (B2) signal] and ground.
    Fig 1: Overall Function Check
    G00720386Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check the following with engine speed held at 2,000 rpm constant under no-load.
    • The voltage should go above 0.70V at least once.
    • The voltage should go below 0.21V at least once.
  4. If NG, go to "Diagnostic Procedure ".
About FixVault