Wheel Side

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: The joint on the wheel side cannot be disassembled.

Before separating joint assembly from the drive shaft, put matching marks on drive shaft and joint assembly.
Separate joint assembly from the drive shaft using a suitable tool.
CAUTION: Do not damage the threads on the drive shaft when separating the joint.
Remove boot bands.
Remove the boot.

Fig 1: Identifying Wheel Bearing Lock Nut
Courtesy of NISSAN MOTOR CO., U.S.A.