FixVault
Home › Infiniti › 2004 › I35 › Repair and Diagnosis › External Pages › Different car › Section 167 (Engine Controls - Self-Diagnostics) › Diagnostic Tests › DTC P0605: Engine Control Module › Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2003 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
  1. If using CONSULT-II, go to next step. If using generic scan tool, go to step  3 .
  2. Turn ignition on. Select SELF-DIAG RESULTS mode with CONSULT-II. Press ERASE. Perform DTC CONFIRMATION TEST "A"  again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.
  3. Turn ignition on. Select MODE 4 with scan tool. Press ERASE. Perform DTC CONFIRMATION TEST "A"  again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.
About FixVault