FixVault
Home › Infiniti › 2004 › I35 › Repair and Diagnosis › External Pages › Different car › Section 249 (TCS) › On Board Diagnostic System Description › Consult-II Inspection Procedure › Data Monitor Procedure

Data Monitor Procedure

WARNING: This page is about a different car, the 2003 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect CONSULT-II to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on CONSULT-II screen.
    Fig 1: Displaying CONSULT-II "START" Screen
    G02091494Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "ABS".
    Fig 2: Displaying "DIAGNOSIS SYSTEM SELECTION" Screen
    G02091495Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch "DATA MONITOR".
  7. Touch "SETTING" on "SELECT MONITOR ITEM" screen.
  8. Touch "START" on "SELECT MONITOR ITEM".
About FixVault