Without CONSULT-II

1. Turn ignition switch OFF.
2. Disconnect radiator coolant temperature sensor harness connector.
3. Connect 2.2KΩ resistor to radiator coolant temperature sensor connector.
4. Start engine.
5. Make sure that cooling fan operates at higher speed than the speed at test No. 1.
   Fig 1: Checking Cooling Fan Operates At A Higher Speed

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK: GO TO 9. CHECK RADIATOR COOLANT TEMPERATURE SENSOR .
2. NG: GO TO 5.