FixVault
Home › Infiniti › 2004 › M45 › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P1720: Vehicle Speed Sensor (A/T Output) › DTC Confirmation Procedure › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine.
  4. Drive vehicle at a speed of 20 km/h (12 MPH) or more for at least 5 seconds without brake pedal depressing.
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
About FixVault