FixVault
Home › Infiniti › 2004 › QX56 AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P0117, P0118: ECT Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
    Fig 1: Display "DATA MONITOR" Mode
    G02691239Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault