Removal and Installation of BCM: Installation

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

NOTE:

When replacing BCM, it must be configured. Refer to "CONFIGURATION ".
When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to "IVIS (INFINITI VEHICLE IMMOBILIZER SYSTEM-NAT ".
When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to "ID REGISTRATION PROCEDURE ".