FixVault
Home › Infiniti › 2004 › QX56 AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Trouble Diagnosis › Consult-II › DTC Work Support Mode › Operation Procedure

Operation Procedure

  1. Perform "CONSULT-II SETTING PROCEDURE" Refer to CONSULT-II SETTING PROCEDURE .
  2. Touch "DTC WORK SUPPORT".
    3. Fig 1: Displaying CONSULT-II SELECT DIAG MODE Screen
    G02249935Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch select item menu.
    4. Fig 2: Displaying CONSULT-II SELECT WORK ITEM Screen
    G02249936Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Touch "START".
    5. Fig 3: Displaying CONSULT-II TCC SOL FUNCTN CHECK Screen
    G02249937Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform driving test according to "DTC CONFIRMATION PROCEDURE" in "TROUBLE DIAGNOSIS FOR DTC".
    Fig 4: Displaying CONSULT-II TCC SOL FUNCTN CHECK Screen
    G02249938Courtesy of NISSAN MOTOR CO., U.S.A.
    • When testing conditions are satisfied, CONSULT-II screen changes from "OUT OF CONDITION" to "TESTING". 
    6. Fig 5: Displaying CONSULT-II TCC SOL FUNCTN CHECK Screen
    G02249939Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Stop vehicle.
    Fig 6: Displaying CONSULT-II TCC SOL FUNCTN CHECK Screen
    G02249940Courtesy of NISSAN MOTOR CO., U.S.A.
    • If "NG" appears on the screen, malfunction may exist. Go to "Diagnostic Procedure". 
  7. Perform test drive to check gear shift feeling in accordance with instructions displayed.
  8. Touch "YES" or "NO".
  9. CONSULT-II procedure is ended.
    Fig 7: Displaying CONSULT-II TCC SOL FUNCTN CHECK Screen
    G02249942Courtesy of NISSAN MOTOR CO., U.S.A.
    • If "NG" appears on the screen, a malfunction may exist. Go to "Diagnostic Procedure"  .
      • Fig 8: Displaying CONSULT-II TCC SOL FUNCTN CHECK Screen
      G02249941Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault