FixVault
Home › Infiniti › 2004 › QX56 RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › DTC P1225: TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON
  2. Select "DATA MONITOR" mode with CONSULT-II
  3. Turn ignition switch OFF and wait at least 10 seconds
  4. Turn ignition switch ON
  5. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
    Fig 1: DTC P1225 Selecting "DATA MONITOR" Mode With CONSULT-II
    G02691656Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault