FixVault
Home › Infiniti › 2005 › FX45 › Repair and Diagnosis › Engine Performance › Engine Control System - VK45DE › DTC P0134, P0154: Ho2S1 › Overall Function Check › With GST

With GST

  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM terminal 16 [HO2S1 (B1) signal] or 35 [HO2S1 (B2) signal] and ground.
  3. Check the following with engine speed held at 2,000 RPM constant under no load.
    • The voltage does not remain in the range of 0.2 to 0.4V.
  4. If NG, go to "DIAGNOSTIC PROCEDURE  ".
    Fig 1: Checking Voltage Between Terminals And Ground
    G02361584Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault