ASD Brake Switch

Check harness continuity between ASD brake switch terminals 1 and 2 under the following conditions.

CONDITION AND CONTINUITY REFERENCE CHART

Condition	Continuity
When brake pedal: Fully released.	Should exist.
When brake pedal: Slightly depressed.	Should not exist.

If NG, adjust ASD brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.

Fig 1: Checking Harness Continuity Between ASD Brake Switch Terminals 1 And 2
Courtesy of NISSAN MOTOR CO., U.S.A.