FixVault
Home › Infiniti › 2005 › FX45 › Repair and Diagnosis › Engine Performance › Engine Control System - VK45DE › DTC P1572: ICC Brake Switch › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch and make sure that CRUISE lamp lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following conditions.
    VHCL SPEED SE AND MORE THAN 30 KM/H (19 MPH)

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Fig 1: Displaying Data Monitor
    G02358733Courtesy of NISSAN MOTOR CO., U.S.A.

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE  ".

    If 1st trip DTC is not detected, go to the following step.

  5. Drive the vehicle for at least 5 consecutive seconds under the following conditions.
    VHCL SPEED SE AND MORE THAN 30 KM/H (19 MPH)

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned vehicle speed.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE  ".
About FixVault