FixVault
Home › Infiniti › 2005 › G35 x › Repair and Diagnosis › Engine Performance › Engine Control System - Sedan › DTC P0451: EVAP Control System Pressure Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 40 seconds.
    NOTE: Do not depress accelerator pedal even slightly.

    If 1st trip DTC is detected, go to "Diagnostic Procedure ".

    Fig 1: Selecting "DATA MONITOR" Mode With CONSULT-II
    G02348626Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault