FixVault
Home › Infiniti › 2005 › G35 x › Repair and Diagnosis › Engine Performance › Engine Control System - Sedan › DTC P1226: TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. Repeat steps 3 and 4 for 32 times.
  6. If 1st trip DTC is detected, go to "Diagnostic Procedure "
    Fig 1: Identifying Data Monitor Display
    G02348846Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault