FixVault
Home › Infiniti › 2005 › G35 x › Repair and Diagnosis › Engine Performance › Engine Control System - Sedan › DTC P1805: Brake Switch › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Fully depress the brake pedal for at least 5 seconds.
  3. Erase the DTC with CONSULT-II.
  4. Select "DATA MONITOR" mode with CONSULT-II.
  5. If 1st trip DTC is detected, go to "Diagnostic Procedure ".
    Fig 1: Data Monitor Display
    G02349048Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault