Section 17 (Brake Control System - Coupe)
WARNING: This page is about a different variant/trim than selected.
- Precautions
- Preparation
- On-Vehicle Service
- General Information
- Can Communication
- Trouble Diagnosis
- How to Perform Trouble Diagnoses
- Component Parts Location
- Schematic
- Wiring Diagram - VDC -
- Control Unit Input/Output Signal Standard
- CONSULT-II Functions
- For Fast and Accurate Diagnosis
- Basic Inspection
- Inspection 1: Wheel Sensor Circuit
- Inspection 2: Engine System
- Inspection 3: VDC/TCS/ABS Control Unit Circuit
- Inspection 4: Pressure Sensor and Circuit Between Pressure sensor and VDC/TCS/ABS Control Unit
- Inspection 5: Steering Angle Sensor and Circuit Between Steering Angle Sensor and VDC/TCS/ABS Control Unit
- Inspection 6: Yaw Rate/Side G Sensor and Circuit Between Yaw Rate/Side G Sensor and VDC/TCS/ABS Control Unit
- Inspection 7: Solenoid, VDC Switching Valve, and Circuits
- Inspection 8: Actuator Motor, Motor Relay, and Circuit
- Inspection 9: Solenoid Valve Relay and Circuit
- Inspection 10: Stop Lamp Switch and Circuit
- Inspection 11: VDC/TCS/ABS Control Unit Power Supply Circuit
- Inspection 12 When "SHIFT POSITION ERROR" Appears in Self-Diagnostic results Display (A/T Models)
- Inspection 13: When "EMERGENCY BRAKE" Appears on Self-Diagnostic Results Display
- Inspection 14: Brake Fluid Level in Reservoir Tank, Communication Circuit Between VDC/TCS/ABS Control Unit and Brake Fluid Level Switch
- Inspection 15: CAN Communication Circuit
- Component Inspection
- Symptom 1: ABS Works Frequently
- Symptom 2: Unexpected Pedal Reaction
- Symptom 3: Long Stopping Distance
- Symptom 4: ABS Does Not Work
- Symptom 5: Pedal Vibration and Sound
- Symptom 6: VDC OFF Indicator Lamp Does Not Illuminate
- Symptom 7: SLIP Indicator Lamp Does Not Illuminate
- Symptom 8: Vehicle Behaves Jerkily During VDC/TCS/ABS Operation
- Wheel Sensor
- VDC/TCS/Abs Control Unit
- Sensor Rotor
- VDC/TCS/Abs Actuator
- G-Sensor
- Steering Angle Sensor