FixVault
Home › Infiniti › 2005 › G35 x › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Engine Control System - Coupe) › Injector Circuit › Component Inspection › Injector

Component Inspection: Injector

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect injector harness connector.
  2. Check resistance between terminals as shown in the figure.
    1. Resistance: 11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)] 
    Fig 1: Checking Resistance Between Injector Circuit Terminals 1 & 2
    G02334185Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault