Operation Procedure

With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector, and turn ignition switch ON.

Fig 1: Identifying Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START (NISSAN BASED VHCL)".

Fig 2: Identifying Touch "Start (Nissan Based Vhcl)
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "MULTIAV".
If "MULTIAV" is not indicated, check the following items.
- AV and NAVI control unit power supply and ground circuit.
  Refer to "POWER SUPPLY AND GROUND CIRCUIT CHECK ".
- CONSULT-II data link connector (DLC) circuit. Refer to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".
Fig 3: Item Shown Chart
Courtesy of NISSAN MOTOR CO., U.S.A.
Select "VERSION", "SELF-DIAG RESULTS" or "SIGNAL MONITOR".