ACC Power Check

CHECK ACC POWER
With CONSULT-II

Check "ACC ON SW" in DATA MONITOR mode with CONSULT-II. Refer to "DATA MONITOR ".

Fig 1: ACC Power - Monitor Item And Condition Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Identifying "ACC ON SW" In Data Monitor Mode
Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Check voltage between BCM connector M18 terminal 11 and ground.

Fig 3: BCM Connector M18 And Ground Voltage Specification Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Checking Voltage Between BCM Connector M18 Terminal 11 And Ground
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK: ACC power circuit is OK.
2. NG: Check the following.
  - 10A fuse [No. 4, located in fuse block (J/B)]
  - Harness for open or short.