FixVault
Home › Infiniti › 2005 › QX56 AWD › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Auto Cruise Control System › Auto Cruise Control System - ICC › Action Test › ICC System Running Test › Vehicle-To-Vehicle Distance Control Mode › Check For Distance Switch

Check For Distance Switch

  1. Start the engine.
  2. Press the ON/OFF switch for less than 1.5 seconds.
  3. Press the DISTANCE switch.
  4. Check if the set distance indicator changes display in order of: (long)-->(middle)-->(short).
    NOTE: The set distance indicator shows long immediately after the engine starts.
    Fig 1: Checking Set Distance Indicator Changes
    G02385935Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault