Front Power Window Motor RH Circuit Check

1. Connect power window and door lock/unlock switch RH.
2. Turn ignition switch ON.
3. Check voltage between power window and door lock/unlock switch RH connector D105 terminals 8, 9 and ground.
   Fig 1: Power Window And Door Lock/Unlock Switch RH connector D105 Terminals 8 And 9 Voltage Specifications

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

1. OK: GO TO 2.
2. NG: Replace power window and door lock/unlock switch RH.

Fig 2: Checking Voltage Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminals 8, 9 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

1. Turn ignition switch OFF.
2. Disconnect front power window motor RH and power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock switch RH connector D105 terminals 8, 9 and front power window motor RH connector D104 terminals 1, 2.
   1. 8 (L) - 2 (L): Continuity should exist. 
   2. 9 (G) - 1 (G): Continuity should exist. 

OK or NG

1. OK: Replace front power window motor RH.
2. NG: Repair or replace harness.

Fig 3: Checking Continuity Between Power Window And Door Lock/Unlock Switch RH Connector D105 Terminals 8, 9 And Front Power Window Motor RH Connector D104 Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.