Center Console

Fig 1: Exploded View Of Center Console Components

Courtesy of NISSAN MOTOR CO., U.S.A.

1. Remove instrument lower cover RH. Refer to "INSTRUMENT PANEL ASSEMBLY  ".
2. Remove glove box assembly. Refer to "INSTRUMENT LOWER COVER RH AND GLOVE BOX  ".
3. Remove instrument lower cover LH. Refer to "INSTRUMENT PANEL ASSEMBLY  ".
4. Remove shift knob and A/T console finisher. Refer to "A/T FINISHER  ".
   • Remove cup holder insert.
   • Remove shift indicator.
5. Remove cluster lid D. Refer to "CLUSTER LID D  ".
6. Disconnect shift cable and electrical harness from shifter.
7. Remove shifter.
8. Remove screws from center console.
   • Disconnect electrical harnesses.
9. Move front seats forward and remove center console assembly in a rearward direction.
10. Remove tray and mat from console bin.
11. Remove latch from console lid.
12. Remove hinge from console lid. Remove console lid.
    • Remove console lid mat.
13. Remove console bin.
    • Disconnect electrical harness from DVD player, if equipped.
    • Remove hinge from console bin.
14. Remove rear upper finisher.
15. Remove rear cup holder assembly.
16. Remove upper side finishers LH/RH.
17. Remove screws on each side, disconnect clips and remove console covers LH/RH.
18. Remove rear finisher assembly.
    • Disconnect electrical connectors.
19. Remove power point assembly.
20. Remove mask and storage compartment.
21. Remove console front bracket.
22. Remove heat duct and console rear duct.
23. Remove console rear bracket.

Assembly is in the reverse order of disassembly.