FixVault
Home › Infiniti › 2005 › QX56 AWD › Repair and Diagnosis › Engine Performance › Engine Control System › DTC P1572: ICC Brake Switch › Diagnostic Trouble Codes Confirmation Procedure › With Consult-II

With Consult-II

  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch and make sure that CRUISE lamp lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following conditions.
    VEHICLE SPEED SPECIFICATION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Fig 1: CONSULT-II Display - DATA MONITOR
    G02389289Courtesy of NISSAN MOTOR CO., U.S.A.

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "

    If 1st trip DTC is not detected, go to the following step.

  5. Drive the vehicle for at least 5 consecutive seconds under the following conditions.
    VEHICLE SPEED SPECIFICATION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned vehicle speed.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
About FixVault