FixVault
Home › Infiniti › 2006 › G35 x › Repair and Diagnosis › Engine Performance › System › Engine Control System - Introduction (Sedan) › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.
  3. Start engine.
  4. After engine stalls, crank it two or three times to release all fuel pressure.
  5. Turn ignition switch OFF.
    Fig 1: CONSULT-II Screen Display - FUEL PRESSURE RELEASE In WORK SUPPORT Mode
    G04119566Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault