FixVault
Home › Infiniti › 2006 › M35 Base › Repair and Diagnosis › Brakes › Traction Control › Brake Control System › G-Sensor › Removal and Installation › Removal

Removal and Installation: Removal

  1. Remove center console. Refer to "COMPONENT PARTS DRAWING ".
  2. Disconnect yaw rate/side G sensor harness connector.
  3. Remove mounting bolts. Remove yaw rate/side G sensor. (Shown in Fig 1 ).
    Fig 1: Identifying G-Sensor
    G04144805Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault