Removal and Installation: Removal
WARNING: This page is about a different car, the 2006 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- Set transfer state as 2WD when 4WD shift switch is at 2WD, or as AUTO when 4WD shift switch is at AUTO.CAUTION: When removing transfer control unit, transfer state must be at 2WD or AUTO.
- Turn the ignition switch OFF and disconnect negative battery terminal.
- Remove the glove box assembly. Refer to "LOWER INSTRUMENT PANEL RH AND GLOVE BOX ".
- Disconnect the two transfer control unit connectors.
- Remove the transfer control unit bolts.
- Remove the transfer control unit.