FixVault
Home › Infiniti › 2006 › M35 Base › Repair and Diagnosis › Transmission › Automatic Transmission › DTC U1000 Can Communication Line › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  3. Start engine and wait for at least 6 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult-II SELECT SYSTEM Display Screen
G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault