Terminals and Reference Values for Automatic Drive Positioner Control Unit
TERMINAL VOLTAGE CONDITION REFERENCE
| Terminal | Wire color | Item | Condition | Voltage (V) (Approx.) | |
|---|---|---|---|---|---|
| 2 | V | Changeover switch RH signal | When changeover switch position | RH | 0 |
| Other than above | 5 | ||||
| 3 | G | Mirror switch UP signal | When mirror switch position | UP | 0 |
| Other than above | 5 | ||||
| 4 | W | Mirror switch LEFT signal | When mirror switch position | LEFT | 0 |
| Other than above | 5 | ||||
| 5 | L/R | Door mirror RH sensor vertical signal | When door mirror RH mirror face position | Close to perk | 4.2 |
| Close to valley | 0.5 | ||||
| 6 | LG | Door mirror LH sensor vertical signal | When door mirror LH mirror face position | Close to perk | 4.2 |
| Close to valley | 0.5 | ||||
| 9 | LG | Seat memory switch 1 signal | Seat memory switch 1 | : ON | 0 |
| : OFF | 5 | ||||
| 10 | O | UART LINE (TX) | Tilt switch operated | ||
| 14 | L | Door mirror RH mirror motor UP signal | When door mirror RH mirror motor operation | UP | Battery voltage |
| Other than above | 0 | ||||
| 15 | G | Door mirror RH mirror motor LEFT signal | When door mirror RH mirror motor operation | LEFT | Battery voltage |
| Other than above | 0 | ||||
| 16 | W/L | Door mirror LH mirror motor RIGHT or DOWN signal | When door mirror LH mirror motor operation | RIGHT or DOWN | Battery voltage |
| Other than above | 0 | ||||
| 18 | O | Changeover switch LH signal | When changeover switch position | LH | 0 |
| Other than above | 5 | ||||
| 19 | L | Mirror switch DOWN signal | When mirror switch position | DOWN | 0 |
| Other than above | 5 | ||||
| 20 | BR | Mirror switch RIGHT signal | When mirror switch position | RIGHT | 0 |
| Other than above | 5 | ||||
| 21 | SB | Door mirror RH sensor horizontal signal | When door mirror RH mirror face position | Close to left edge | 3.5 |
| Close to right edge | 0.5 | ||||
| 22 | O/L | Door mirror LH sensor horizontal signal | When door mirror LH mirror face position | Close to left edge | 0.5 |
| Close to right edge | 3.5 | ||||
| 24 | BR/W | Set switch signal | Set switch | : ON | 0 |
| : OFF | 5 | ||||
| 25 | LG/B | Seat memory switch 2 signal | Seat memory switch 2 | : ON | 0 |
| : OFF | 5 | ||||
| 26 | P | UART LINE (RX) | Tilt switch operated | ||
| 30 | GR | Door mirror LH mirror motor RIGHT or DOWN signal | When door mirror LH mirror motor operation | RIGHT or DOWN | Battery voltage |
| Other than above | 0 | ||||
| 31 | BR | Door mirror LH mirror motor UP signal | When door mirror LH mirror motor operation | UP | Battery voltage |
| Other than above | 0 | ||||
| 32 | T | Door mirror LH mirror motor LEFT signal | When door mirror LH mirror motor operation | LEFT | Battery voltage |
| Other than above | 0 | ||||
| 33 | W | Mirror sensor power supply | - | Battery voltage | |
| 34 | R | Power supply (fuse) | - | Battery voltage | |
| 39 | L | Power supply (fusible link) | - | Battery voltage | |
| 40 | B | Ground (signal) | - | 0 | |
| 41 | Y | Sensor ground | - | 0 | |
| 48 | B | Ground (power) | - | 0 | |