Release Switch
Disconnect brake booster connector and check resistance between terminals.
RELEASE SWITCH
| Condition | 1 - 3 | 1 - 2 | 2 - 3 |
|---|---|---|---|
| Release the brake pedal. | Continuity should exist. | Continuity should not exist. | Continuity should not exist. |
| Depress the brake pedal. | Continuity should not exist. (Note) | Continuity should exist. (Note) | Continuity should not exist. |
|
NOTE:
However, if pedal is depressed insufficiently, resistance value may remain unchanged.
|
|||