FixVault
Home › Infiniti › 2006 › Q45 › Repair and Diagnosis › Body & Frame › Door Locks › Body, Lock & Security System › Power Door Lock System › CONSULT-II Function › Consult-II Basic Operation Procedure

Consult-II Basic Operation Procedure

  1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT- II CONVERTER" to the data link connector, and turn the ignition switch ON.
    Fig 1: Identifying Data Link Connector
    G04129361Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    Fig 2: Consult-II Display Screen
    G04151184Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "IVMS".

    If "IVMS" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

    Fig 3: Consult-II SELECT SYSTEM Display Screen
    G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Check the model specification, touch either "WITH SUNROOF" or "WITHOUT SUNROOF".
  5. Touch "OK". If the selection is wrong, touch "CANCEL".
    Fig 4: CONSULT-II Display - WITH SUNROOF
    G04129364Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.
About FixVault