FixVault
Home › Infiniti › 2006 › Q45 › Repair and Diagnosis › Body & Frame › Door Locks › Body, Lock & Security System › Remote Keyless Entry System › Check ACC Power

Check ACC Power

  1. CHECK ACC POWER 

    With CONSULT-II 

    Check ACC power ("ACC ON SW") in "DATA MONITOR" mode with CONSULT-II.

    MONITOR ITEM CONDITION CHART

    Monitor item Condition
    ACC ON SW Ignition switch ACC or ON position : ON
    Ignition switch OFF position : OFF
    Fig 1: CONSULT-II Display - Data Monitor
    G04129425Courtesy of NISSAN MOTOR CO., U.S.A.

    Without CONSULT-II 

    Check voltage between BCM connector and ground.

    CONNECTOR VOLTAGE CHART

    Connector Terminal (Wire color) Condition Voltage (V) (Approx.)
    ( + ) ( - )
    M4 60 (L/OR) Ground ACC or ON Battery voltage
    OFF 0

    OK or NG 

    • OK : ACC power is OK.
    • NG : Check the following.
      • 10A fuse [No. 21, located in fuse block (J/B) No. 1]
      • Harness for open or short between BCM and fuse
        Fig 2: Checking Voltage Between BCM Connector And Ground
        G04129426Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault