Check Door Switch

With CONSULT-II

• Check door switch in "DATE MONITOR" mode with CONSULT-II. Refer to "DATA MONITOR "
  Fig 1: CONSULT II Display - Data Monitor

  Courtesy of NISSAN MOTOR CO., U.S.A.

  When door is opened: DOOR SW ON 

  When door is closed: DOOR SW OFF 

Without CONSULT-II

• Check all door switches in switch monitor mode. Refer to Remote keyless entry system SWITCH MONITOR .

OK or NG 

• OK: Door switch is OK.
• NG: GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect door switch connector.
3. Check continuity between following terminals and ground.
   CONNECTOR SPECIFICATION CHART
   
   

   Connector		Terminals (Wire color)		Condition	Continuity
   Front door switch (driver side)	B20	1 (W/R)	Ground	Pressed	No
   				Repressed	Yes
   Front door switch (passenger side)	B220	1 (W/G)		Pressed	No
   				Repressed	Yes

   Fig 2: Checking Door Switch

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

• OK: Repair or replace following item, when there is a malfunction.
  • Door switch ground condition
  • Harness for open or short between door switch and BCM
• NG: Replace door switch.