Terminals and Reference Value for Driver Door Control Unit
TERMINALS AND REFERENCE VALUE FOR DRIVER DOOR CONTROL UNIT
| TERMINAL | WIRE COLOR | Signal name | Signal input/output | Measuring condition | VOLTAGE (V) (Approx.) | |
|---|---|---|---|---|---|---|
| Ignition switch | Operation condition | |||||
| 1 | G | Encoder pulse signal | Input | ON | When power window motor operates | |
| 4 | W | Encoder power supply | Output | ON | When ignition switch ON or power window timer operates | 10 |
| 5 | G/OR | Local communication | - | ON | When ignition switch ON or power window timer operates | |
| 7 | PU | Limit switch signal | Input | ON | Driver side door window is in a position between fully-open and just before fully-closed position (ON) | 0 |
| Driver side door window is in a position between just before fully-closed position and fully-closed position (OFF) | 5 | |||||
| 8 | G/W | Data line A-3 | - | - | - | - |
| 9 | PU/W | Door key cylinder unlock switch | Input | OFF | OFF (Neutral) -> ON (Unlock) | 5 -> 0 |
| 10 | GY | Door key cylinder lock switch | Input | OFF | OFF (Neutral) -> ON (Lock) | 5 -> 0 |
| 11 | L/W | Power window motor DOWN signal | Output | ON | When power window motor DOWN operates | Battery voltage |
| 14 | Y/G | Power source (Fusible link) | Input | OFF | - | Battery voltage |
| 15 | B | Ground | - | ON | - | 0 |
| 18 | L/R | Power window motor UP signal | Output | ON | When power window motor UP operates | Battery voltage |