Rear View Camera Guide Line

When A/T selector lever is reverse position, power is supplied

• through back-up lamp relay terminal 1
• to A/T assembly terminal 7.

Then back-up lamp relay is energized

• from back-up lamp relay terminal 3
• to AV control unit terminal 19 (without NAVI)
• to AV and NAVI control unit terminal 27 (with NAVI).

Then AV control unit (AV and NAVI control unit) is sent rear view camera guideline image

• through AV control unit terminals 18, 21 and 24 (without NAVI)
• through AV and NAVI control unit terminals 18, 21 and 15 (with NAVI)
• to display terminals 1, 2 and 3.

Rear view camera guide line will be projected on the display.