FixVault
Home › Infiniti › 2006 › QX56 AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing › Fuel Pump › Component Inspection › Condenser-2

Component Inspection: Condenser-2

  1. Turn ignition switch OFF.
  2. Disconnect condenser-2 harness connector.
  3. Check resistance between condenser-2 terminals as 1 and 2.
    CONDENSER-2 RESISTANCE

    Resistance Above 1 MΩ at 25°C (77°F)
    Fig 1: Identifying Resistance Between Connector Terminals
    G04075318Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault