FixVault
Home › Infiniti › 2006 › QX56 AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - DTCS P1225 To P2A03 › DTC P1225 TP Sensor › DTC Confirmation Procedure › With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select " DATA MONITOR" mode with CONSULT-II.
  3. Turn ignition switch OFF and wait at least 10 seconds.
  4. Turn ignition switch ON.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04080353Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault