FixVault
Home › Infiniti › 2006 › QX56 AWD › Repair and Diagnosis › Transmission › Transfer Case › Trouble Diagnosis For System › Neutral-4LO Switch › Component Inspection

Component Inspection

  1. Turn ignition switch "OFF". (Stay for at least 5 seconds.)
  2. Disconnect neutral-4LO switch harness connector.
  3. Remove neutral-4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
  4. Push and release neutral-4LO switch and check continuity between neutral-4LO switch terminals 12 and 13.
    TERMINALS CONTINUITY CHART

    Terminal Condition Continuity
    12 - 13 Push neutral-4LO switch Yes
    Release neutral-4LO switch No
    Fig 1: Identifying Continuity Between Neutral - 4LO Switch Terminals 12 And 13
    G04133960Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If NG, replace the neutral-4LO switch. Refer to "LOCATION OF ELECTRICAL PARTS ".
About FixVault