Inspection Procedure
- CHECK SELF-DIAGNOSTIC RESULTS
Check the self-diagnostic results.
SELF-DIAGNOSTIC RESULTSSelf-diagnostic results ENGINE SIGNAL 1 ENGINE SIGNAL 2 ENGINE SIGNAL 3 ENGINE SIGNAL 4 ENGINE SIGNAL 6 Is the above displayed in the self-diagnosis display items?
Yes: GO TO 2.
No: INSPECTION END
- CHECK ENGINE SYSTEM
- Perform an ECM self-diagnosis and repair or replace malfunctioning items. Perform ECM self-diagnosis again.
- Perform ABS actuator and electric unit (control unit) self-diagnosis again.
OK or NG
OK: INSPECTION END
NG: Repair or replace malfunctioning items. Perform the self-diagnosis again.