FixVault
Home › Infiniti › 2007 › FX45 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Body, Lock & Security System › Remote Keyless Entry System › Check Key Fob Battery and Function

Check Key Fob Battery and Function

  1. CHECK KEY FOB BATTERY 
    1. Remove key fob battery. Refer to "KEY FOB BATTERY REPLACEMENT ".
      2. Fig 1: Identifying Key Fob Battery Voltage
      G04877105Courtesy of NISSAN MOTOR CO., U.S.A.
    2. Measure voltage between battery positive and negative terminals, (+) and (-).

      Voltage : 2.5 - 3.0V 

    NOTE: Key fob does not function if battery is not set correctly.

    OK or NG 

    OK: GO TO 2.

    NG: Replace battery.

  2. CHECK KEY FOB FUNCTION 

    With CONSULT-II 

    Check key fob function in "DATA MONITOR" mode with CONSULTII. When pushing each button of key fob, the corresponding monitor item should be turned as follows.

    Fig 2: Identifying CONSULT II DATA MONITOR Screen
    G04936521Courtesy of NISSAN MOTOR CO., U.S.A.
    CONSULT-II DATA MONITOR MODE

    Condition Monitor item
    Pushing LOCK KEYLESS LOCK : ON
    Pushing UNLOCK KEYLESS UNLOCK : ON
    Keep pushing UNLOCK RKE KEEP UNLK : ON
    Pushing PANIC KEYLESS PANIC : ON
    Pushing LOCK and UNLOCK at the same time RKE LCK-UNLOCK : ON

    OK or NG 

    OK: Key fob is OK.

    NG: Replace key fob.

About FixVault