System Description: Inputs

Power is supplied at all times

• to BCM terminal 55
• through 50A fusible link (letter M  , located in the fuse and fusible link box).
• to BCM terminal 42
• through 15A fuse [No. 22, located in the fuse block (J/B)].
• to Horn relay terminal 2
• through 15A fuse (No. 34, located in the fuse and fusible link box).

  When the key switch is ON (key is inserted in ignition key cylinder), power is supplied

• to BCM terminal 37
• through key switch terminal 1 and 2
• through 15A fuse [No. 22, located in the fuse block (J/B)].

  When the ignition switch is ACC or ON, power is supplied

• to BCM terminal 11
• through 10A fuse [No. 6, located in the fuse block (J/B)].

  When the ignition switch is ON or START, power is supplied

• to BCM terminal 38
• through 15A fuse [No. 1, located in the fuse block (J/B)].

  When the front door switch (driver side) is ON (door is OPEN), ground is supplied

• to BCM terminal 62
• through front door switch (driver side) terminal 1
• through front door switch (driver side) case ground.

  When the front door switch (passenger side) is ON (door is OPEN), ground is supplied

• to BCM terminal 12
• through front door switch (passenger side) terminal 1
• through front door switch (passenger side) case ground.

  When the rear door switch LH is ON (door is OPEN), ground is supplied

• to BCM terminal 63
• through rear door switch LH terminal 1
• through rear door switch LH case ground.

  When the rear door switch RH is ON (door is OPEN), ground is supplied

• to BCM meter terminal 13
• through rear door switch RH terminal 1
• through rear door switch RH case ground.

  When the back door switch is ON (door is open), ground is supplied

• to BCM terminal 58
• through back door closure motor (door switch) terminals 7 and 8
• through body grounds B15 and B45

  Key fob signal is inputted to remote keyless entry receiver (the antenna of the system is built in remote keyless entry receiver).

• to BCM terminal 20
• from remote keyless entry system controls operation of the

  The remote keyless entry system controls operation of the

• power door lock
• hazard and horn reminder
• auto door lock
• panic alarm
• keyless power window down (open)
• room lamp and key ring illumination