FixVault
Home › Infiniti › 2007 › FX45 › Repair and Diagnosis › Body & Frame › Windows › Glass, Window System & Mirrors › Power Window System › Check Front Power Window Motor (Passenger Side) Circuit

Check Front Power Window Motor (Passenger Side) Circuit

  1. CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) OUTPUT SIGNAL 
    1. Turn ignition switch ON.
    2. Check voltage between front power window switch (passenger side) connector and ground.
      3. Fig 1: Identifying Voltage Between Front Power Window Switch Connector And Ground
      G04918692Courtesy of NISSAN MOTOR CO., U.S.A.
    FRONT POWER WINDOW SWITCH (PASSENGER SIDE) OUTPUT SIGNAL

    Connector Terminals (Wire color) Window condition Voltage [V] (Approx.)
    (+) (-)
    D36 8 (L) Ground UP Battery voltage
    DOWN 0
    9 (G) UP 0
    DOWN Battery voltage

    OK or NG 

    OK: GO TO  2.

    NG: Replace front power window switch (passenger side).

  2. CHECK HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect front power window switch (passenger side) and front power window motor (passenger side) connector.
    3. Check continuity between front power window switch (passenger side) connector D36 terminals 8, 9 and front power window motor (passenger side) connector D38 terminals 1, 2.

      8 (L) - 2 (L) : Continuity should exist. 

      9 (G) - 1 (G) : Continuity should exist. 

      Fig 2: Identifying Continuity Between Front Power Window Switch Connector D36 Terminals 8, 9 And Power Window Motor Connector D38 Terminals 1, 2
      G05221192Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Replace front power window motor (passenger side).

    NG: Repair or replace harness.

About FixVault