Intake Valve Timing Control Position Sensor

1. Disconnect intake valve timing control position sensor harness connector.
2. Loosen the fixing bolt of the sensor.
3. Remove the sensor.
4. Visually check the sensor for chipping.
   Fig 1: Inspecting Intake Valve Timing Control Position Sensor

   Courtesy of NISSAN NORTH AMERICA, INC.
5. Check resistance as shown below.
   RESISTANCE REFERENCE
   
   

   Terminal No. (Polarity)	Resistance Ω [at 25°C (77°F)]
   3 (+) - 1 (-)	Except 0 or ∞
   2 (+) - 1 (-)
   3 (+) - 2 (-)

6. If NG, replace intake valve timing control position sensor.

Fig 2: Checking Intake Valve Timing Control Position Sensor Resistance

Courtesy of NISSAN NORTH AMERICA, INC.