Diagnostic Procedure

With CONSULT-II 

1. Turn ignition switch ON and start engine.
2. Select "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.
Fig 1: Identifying CONSULT II - Screen Display - SELF-DIAG RESULTS
Courtesy of NISSAN MOTOR CO., U.S.A.

Is any malfunction of the "U1000 CAN COMM CIRCUIT" indicated? 

Yes: Print out CONSULT-II screen, go to LAN information. Refer to "CAN SYSTEM SPECIFICATION CHART ".

No: INSPECTION END