FixVault
Home › Infiniti › 2007 › G35 x › Repair and Diagnosis › External Pages › Different variant/trim › Section 43 (Engine Control System - Introduction (Coupe)) › Basic Service Procedure › Fuel Pressure Check › Fuel Pressure Release › Without CONSULT-II

Without CONSULT-II

WARNING: This page is about a different variant/trim than selected.
  1. Remove fuel pump fuse located in IPDM E/R.
  2. Start engine.
  3. After engine stalls, crank it two or three times to release all fuel pressure.
  4. Turn ignition switch OFF.
  5. Reinstall fuel pump fuse after servicing fuel system.
    Fig 1: Removing Fuel Pump Fuse Located In IPDM E/R
    G04179508Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault