FixVault
Home › Infiniti › 2007 › QX56 AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Component Testing › Ignition Signal › Component Inspection › Condenser-1

Component Inspection: Condenser-1

  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals 1 and 2.
    TERMINALS RESISTANCE CHART

    Resistance Above 1 MΩ at 25°C (77°F)
    Fig 1: Checking Resistance Between Condenser-2 Terminals 1 And 2
    G04875488Courtesy of NISSAN NORTH AMERICA, INC.
About FixVault