Transfer Control Unit Terminals And Reference Value
Data are reference value and are measured between each terminal and ground.
TRANSFER CONTROL UNIT TERMINALS AND REFERENCE VALUE CHART
| Terminal | Wire color | Item | Condition | Data (Approx.) | |
|---|---|---|---|---|---|
| 28 | B/G | Sensor ground | Always | 0V | |
| 31 | G | Transfer fluid temperature sensor | Ignition switch: ON | Transfer fluid temperature approx. 20°C (68°F) | 1.1V |
| Transfer fluid temperature approx. 80°C (176°F) | 0.3V | ||||
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.