FixVault

DTC Detection Logic

NOTE: If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC 
DTC DETECTION LOGIC TABLE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210F INTER LOCK/PNP SW ON IPDM E/R detects a mismatch between the signals below for 1 second or more.
  • PNP switch input signal
  • Shift position signal from BCM (CAN)
  • Harness or connectors

    [Park/neutral position (PNP) switch circuit is open or shorted

  • Park/neutral position (PNP) switch