Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window motor (passenger side) harness connector and ground.
   VOLTAGE SPECIFICATION
   
   

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Front power window motor (passenger side)
   Connector	Terminal
   D40	1	Ground	Front power window switch (passenger side)	UP	0
   				DOWN	Battery voltage
   	2			UP	Battery voltage
   				DOWN	0

Is the inspection result normal? 

YES: GO TO  3.

NO: GO TO  2.

1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.
   CONTINUITY SPECIFICATION
   
   

   Front power window switch (passenger side)		Front power window motor (passenger side)		Continuity
   Connector	Terminal	Connector	Terminal
   D38	9	D40	1	Existed
   	8		2

4. Check continuity between front power window switch (passenger side) harness connector and ground.
   CONTINUITY SPECIFICATION
   
   

   Front power window switch (passenger side)		Ground	Continuity
   Connector	Terminal
   D38	9		Not existed
   	8

Is the inspection result normal? 

YES: Replace front power window switch (passenger side). Refer to REMOVAL AND INSTALLATION  .

NO: Repair or replace harness.

Check front power window motor (passenger side).

Refer to COMPONENT INSPECTION  .

Is the inspection result normal? 

YES: GO TO  4.

NO: Replace front power window motor (passenger side). Refer to REMOVAL AND INSTALLATION .

Refer to INTERMITTENT INCIDENT .

INSPECTION END