FixVault
Home › Infiniti › 2008 › EX35 Base, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - DTCS U1000 To P0153 › P0117, P0118 ECT Sensor › DTC Logic › DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON and wait at least 5 seconds.
    2. Check DTC.

    Is DTC detected? 

    YES: Go to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

About FixVault